Ati X800 Mac Drivers
Very strange. Thank You for Submitting an Update to Your Review, ! Attached is a zip file with photos. (2MB zip file attached - images too large to post here, but maybe I can scale some down/crop them later.-Mike) Each Blue/Green/Light Blue dot Ati Radeon X800 XT Mac Edition Download Drivers Home > video cards > Ati Series > Radeon Serie > Radeon X800 XT Mac Edition Available 2 files for Radeon X800 XT look at this site
Amd Radeon Drivers
I called ATI support about this and they responded by telling me that "this is not a known issue to ATI." So I pointed them to the Newtek lightwave mac forum Some noted resetting nvram/pram helped, but that's clearly not been not a fix for everyone. (added 4/22/2005) "I flashed my X800 XT card without any problems and installed the ATI Display I have a Dual 2.5GHz, with a 20" and 23" Apple Displays (aluminum). When I moved it back to the monitor, KP.
When I finally booted into safe mode I had everything connected, firewire, usb hubs all connected to 23" Cinema HD monitor. G5 2.0 dp rev b, 4 gb ram, 160 gb and 400 2nd drive, samsung 243t monitor, legato 500, 10.3.9 ....awaiting Tiger. -Jim S. " (added 4/29/2005) "I installed the 107 It is the ATI fan. (although fan control is in the X800 107 and later ROMs, I asked if he installed ATI displays 4.5.1 which also has the latest ROM Xtender Radeon Relive Apple System Profiler shows ROM revision as 113-A35801-109.
Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. Amd Radeon Settings I created this new post since the previous one I posted to was already answered. After applying v108 of the firmware, which just came out yesterday, it boots perfectly using 10.4 on a 2.5GHz MP G5. No problems before, and no problems now, except the loud whirring during booting (before the ROM extender loads) is gone.
They know they have an issue as I sent them my crash logs and they know what the problem is, they are working to fix it in the next 3-4 days Amd Radeon R9 Similar Software Open Comparison No similar apps have been recommended yet. Support for HDTVs via DVI Port. Update: Later that day I went back and took the X800 XT out and put the original ATI 9600, which had shipped with the G5, back in.
Amd Radeon Settings
Please type your message and try again. http://www.helpdrivers.com/video/Ati/Radeon_Serie/Radeon_X800_XT_Mac_Edition/ This discussion is locked ¬†¬†¬†¬† ¬†¬†¬†¬†¬† Bob OHalloran Level 1 (100 points) Desktops Q: X800XT Graphics card, firmware/install I looked at the ebay listing for this card and it sounds like Amd Radeon Drivers This was after running the 108 firmware and ATI 4.5.1 Update. Ati Graphics Cards In 10.3.7 the 'slot combined' power as reported by Hardware Monitor was ~14,000 and the fan speed was 29.8%. (With no PCI cards installed, I saw 48.9% (as did others) even
The thing that caught my eye about the v109 was the part about firmware control of the fans. Thanks. (added 4/25/2005) "I also have a dual 2.5GHz G5 Powermac with a Radeon X800 XT (OS 10.3.8). Tried all suggestions (and combinations) found on your site so far with not much success... http://kncsoftware.com/amd-radeon/ati-x800-pro-drivers.html I immediately mentioned this to ATI and was told I was the only person that had complained about fan noise.
Art B. Amd Radeon Graphics Eric M. (asked if he'd tried the usual voodoo like clearing the system caches, etc.-Mike) Yup, i tried cleaning the caches, and stopped the fan w/my finger (it is the offending As soon as I do, everything comes back and I have to go through several reboots to get it back running.
I'm running a dual 2.5 G5. Zapped the PRAM, and I have the Xtender installed (with ATI Display 4.5.1). " (added 5/13/2005) "I too had major boot problems with a brand new X800 card after updating it But the amount of fan noise turned me off to the card. Amd Chipset Drivers For articles on replacing a 9800's HS/fan with the verax (too expensive IMHO) or the lower cost Arctic VGA Silencer, see the Video topics page, graphics card section.) X800 XT Card
I won't bother with a direct link because aleady noted the cookie requirements on the site prevent such links from working properly. That's the card.Thanks, Apr 20, 2010 5:50 AM Helpful (0) Reply options Link to this post by japamac, japamac Apr 20, 2010 5:55 AM in response to Bob O'Halloran Level 7 This is an urgent matter and if they want to participate should contact me right away and be prepared to quickly answer a questionnaire and sign an NDA which will need http://kncsoftware.com/amd-radeon/ati-x800-xp-drivers.html Boot back into 10.3.9, moved back to 104 ROM, and rebooted with Tiger.
V-Sync disabled for Mac OS X 10.4.3; enabled for prior OS versions. Bruno " I enabled cookies in my browser and went to the support.ati.com site and saw the post dated today on the ROM update. I installed the v109 firmware on my system (Dual 2GHz G5, 30" Cinema Display/23" Cinema Display ADC) in Safe Boot mode. I gave Cocktail a go and got it to delete the caches but it didn't seem to have any effect.
Test system is a Dual 2GHz G5 with 3.5GB RAM running 10.3.7 (More system details below.) Drivers used were the ones included in the OS X 10.3.7 update. (The X800 XT I have had no startup problems.(name withheld by request) " (added 5/13/2005) "I installed v108, and the KP problem is gone, so I can use it fine, but the problem with There are many posts on this problem on Apple's Discussion board. After a reboot, the same again, but this time the bar came up, but the mouse could still not move.
On the X800, all detail settings maxed out at this rez and still triple frame rate Approx 65 vs 21.5 with the old card. My DP2.5 G5 has just slowly been going downhill gradually since the ATI ROM update... I installed ATI Displays 4.5 a few days ago, and yesterday night I installed the new firmware. But if the mouse isn't working and I log in, my system will freeze before the menu bar shows.
I first did the combo 10.3.9 update then did the ATI CD install. Anyway, I run Doom 3 at 1600x1200 and full screen on the Apple 30" means having the black bars left and right. Bengt " I don't know what to suggest at this point... (still not had a problem personally on my 2003 DP 2GHz G5 with these updates.) (added 4/25/2005) "Hey Mike, This I've used the card for a month and I've haven't had any problems until the ROM and Display update.